There was a time when the very concept of men wearing wedding bands did not even exist. There was no physical item or jewelry that revealed if a man was married. Wedding rings were something that was restricted to womankind only. Thankfully, the times have changed for the better!
You will now see men sporting their wedding bands with significant enthusiasm. Men today openly regard and embrace the love for their partner by putting a ring on it, quite literally!
Unique men’s wedding bands are a symbol of love and commitment towards your partner. This is why you need to ensure that you take good care of it at all times. But how can you do that?
Where would you start?
More importantly, will it cost too much?
In this piece, we have discussed top DIY cleaning tips to keep your wedding band sparkling clean at all times!
DIY Wedding Band Cleaning Tips
It’s quite obvious that you want to retain the polish and the shine of your wedding band for as long as possible. The good news is that you can do it within the comfort of your home!
Know that your wedding band will stay with you for the rest of your life. This makes it even more important to ensure that its gleam, just like your love, lasts for an eternity.
You do not have to burn a hole in your pocket investing in expensive polishes to clean your wedding band. You can restore its original shine by using some of the items readily available in your kitchen.
For your convenience, we have highlighted 4 easy DIY tips you can use to get rid of the dirt and grime on your wedding band and these are best grooming tips for men .
Use Liquid Soap
When cleaning your wedding band, liquid soap is the most ideal solution (pun intended)! Ensure that you choose a high-quality liquid soap to clean your wedding band. For best results, mix it with warm water and soak the ring in the solution for some time.
If your ring has gemstones attached, use a soft toothbrush to scrub the grime off the stones. This is the most popular and easiest way to restore your wedding band to its original glory all on your own!
2. Use Cold Light Beer Brew
If you have a gold wedding band, then using beer brew to get it cleaned is perfect. However, make sure that you use light beer brew only and not the dark one. The hops in the beer brew contain distinctive alpha acids that help scrub the dirt off. Light-colored beers have less amount of hops which is more gentle on golden wedding bands.
For cleaning, take a clean washcloth and pour the cold light beer on it. Now rub the wedding band gently and scrub off the stains and the grime. The hops from the light beer will protect the surface of your precious wedding band.
Once you are done with the polishing, dry the surface of your band using a soft, clean cloth.
3. Use Ketchup
This may come as a surprise but ketchup is an excellent cleaning agent especially if your wedding band is made out of silver. Just take a soft toothbrush and apply a generous amount of ketchup on the surface of the ring. Now gently scrub the ring and eliminate the dirt and the grime stuck on the surface. With this DIY cleaning method, you can reach into corners and engraved cracks of the ring.
Ketchup contains natural acids and vinegar found in tomatoes. These elements help clean your wedding band thoroughly no matter how stubborn the dirt is. As soon as you finish cleaning, rinse off the ketchup immediately. Remember to not leave this application on for too long as it might cause the metal to break down.
Just be careful and extremely attentive when using ketchup to clean your wedding band.
4. Use Alka-Seltzer Tablets
Alka-Seltzer tablets that are readily available in the market for headaches are great for cleaning your wedding bands. What’s more, these tablets could be used to clean almost all wedding bands out there. So you won’t have to worry about your ring being made out of gold, silver or platinum!
These tablets contain sodium bicarbonate and other anhydrous citric acids that produce fizz. This bubbly fizziness aids the cleaning process, making your wedding bands sparkling clean once again.
For cleaning, dissolve two tablets in some water and soak your wedding band in this solution for around 30 minutes. Once the band is sufficiently soaked, take it out of the solution and wash it thoroughly. Use a soft, clean cloth to dry it off and you will have a gleaming wedding band in no time!
The Bottom Line…
There you have it – simple and quick cleaning tips for unique men’s wedding bands! These are fairly easy DIYs not to mention affordable as well!
You can now use these simple techniques to keep your wedding band shining forever!