Netgear Nighthawk router is the best WiFi device that enhances the existing signal range and coverage providing lag-free internet experience throughout your home. However, similar to any other WiFi device, Netgear Nighthawk router is also prone to technical glitches. And the most common issue experienced by every 3rd user across the globe is “Netgear Nighthawk router keeps disconnecting”.
On the off chance if you are also struggling with the same issue, we’ve got your back. In this article, we will make you familiar with all the possible fixes that will help you get rid of the “Netgear Nighthawk router keeps disconnecting” issue in minutes. Let’s take the plunge!
Why My Netgear Nighthawk Router Keeps Disconnecting?
There can be a number of reasons causing Netgear Nighthawk router keeps disconnecting issue. A couple of them are listed below:
- Wireless interference from other WiFi devices
- Incomplete Netgear WiFi router setup
- The firmware of your Netgear Nighthawk router is outdated
- Your Nighthawk router isn’t getting sufficient power supply
- Netgear router is not connected to your modem
So, these were some common reasons that cause “Netgear Nighthawk keeps disconnecting” issue”. Now, let’s get to know how to fix the issue.
How to Fix Netgear Nighthawk Router Keeps Disconnecting Issue?
Walk through the fixes listed below and know how to fix Netgear Nighthawk router keeps disconnecting issue in no time.
Change the WiFi Settings of your Netgear Nighthawk Router
Having default WiFi settings on your Netgear Nighthawk router may conflict with other devices having the same frequency. So, to fix Netgear Nighthawk router keeps disconnecting issue, it is suggested to change the default WiFi settings of your device.
In such a case, it is suggested to restart your Netgear Nighthawk router after making the changes. Also, disconnect your devices from your router’s WiFi prior to making the changes.
Placement of Your Netgear Nighthawk Router
Once you are done with Nighthawk router setup it is suggested to relocate your Netgear device on a higher, clean, and cool surface. Also, it is advisable to place your router in reach of your modem and away from walls, ceilings, corners, etc. To acquire the router’s best WiFi signals, do not place your router inside a cabinet.
Update the Firmware of Your Netgear Nighthawk Router
Another effective way to fix Netgear Nighthawk router keeps disconnecting issue is to update the firmware of your device. To update the Nighthawk router’s firmware, visit the Netgear WiFi router setup page for step-by-step instructions.
Once the firmware of your Netgear Nighthawk router gets updated, your device will restart automatically. So, be calm and have patience!
Check the Power Supply
If your Netgear Nighthawk router isn’t getting sufficient power supply then also may encounter this annoying issue. So, to get that fixed, make sure to plug your Netgear Nighthawk router into a working wall outlet and that too within range of your modem.
Make a Connection
Once you are done with the power supply process, then next step in our post is to make a connection between your modem and Netgear Nighthawk router. All you have to do is to grab an Ethernet cable and connect your modem with your Netgear Nighthawk router.
Still Facing the Same Issue?
In the event that the Netgear Nighthawk router keeps disconnecting issue continues to trouble you, then reset Nighthawk router back to the default factory settings.
Contact Your ISP
The culprit behind the issue can also be your ISP. So, what you have to do is to contact your ISP and have a word with them regarding your internet plan.
- If your internet plan has expired, make sure to clear all the pending bills.
- If your modem has become outdated, ask your ISP to upgrade it.
Pro Tip: Opt for Netgear WiFi range extender to all WiFi dead zones in your home. Contact us for Netgear wireless extender setup help and to fix issues with your Nighthawk router.